Fiber Optic Patch Cable with Single Model Simplex

                                 Guangzhou Lulink Hot Sale FO Patch Cord

LK03FCFC101
FC-FC,SM,SIMPLEX,2.0/3.0MM

Fiber optic patch cable brief introduction
Fiber patch cable is the fiber which connects the computer with equipment. , it is very convenient to connect and manage, thicker layer of protection, generally used in the connection between the Optical and the terminal box.

Fiber Jumper structure
1.it's structure is similar with the structure of coaxial cable, both of them do not mesh shield.
2. The center is glass core of light transferring
3. Core diameter of Multimode fiber is 15μm ~ 50μm,
4. Core diameter of Single-mode fiber is 8μm ~ 10μm.
5. The core surrounded by a layer of glass envelope with lower refractive index, so the fiber remained in the core
6. A thin plastic coat outside is used to protect the envelope.

Fiber jumper Category
Transmission medium:
1. Silicon fiber optic jumper
2. Plastic fiber optic jumper

Based on connector:
FC patch cable,SC patch cable,ST patch cable,LC patch cable,MTRJ patch cable,MPO patch cable,MU patch cable,SMA patch cable,FDDI patch cable,E2000patch cable,DIN4patch cable,D4patch cable and so on.
Normal fiber optic patch cable:FC-FC,FC-SC,FC-LC,FC-ST,SC-SC,SC-ST and so on
Based on Cable outer sheath material:
Ordinary type, the common flame retardant type, low smokes zero halogen type, low smoke zero halogen flame retardant type.
 
Based on Patch cable length:0.5m,1m,2m,3m,5m,10m
Based on single mode or multi-mode:
Single mode:color yellow can describe fiber optic patch cable, the color of connector and out jacket is blue, long distance transferring.
Multi-mode:color orange or gray can describe fiber optic patch cable, the color of connector and out jacket is black, short distance transferring.

Based on Fiber patch cable using notes:
1, the fiber optic patch cable can not over-bending and circling, it will increase the attenuation of light in the transmission process.
2, wave length of fiber optic module in two ends must be consistent. It means two ends of fiber optic module must be same.
3. The out jacket of connector must be used to protect against dust and oil damaging the optical fiber coupling.

Characteristics of optical fiber patch cable
1. Low insertion loss
2 good repeatability
3.big Return Loss
4.Mutual insert performance
5 good temperature stability

Fiber optic patch cable Application
1. An optical fiber communication system
2.optical access network
3 fiber-optic data transmission
4. Fiber optic CATV
5.a local area network (LAN)
6. Test equipment
7 fiber optic sensors
 
The most advanced equipments for both producing and testing, which imported from Europe and America. 
The main export markets:
North America, Asia ,Western Europe , Australia , Africa ,South America ,Middle East

Our service:
1)Reply your enquiry within 24 working hours;
 
2)Experienced staffs answer all your questions in fluent English;
 
3)Customized Design is available,OEM&ODM are welcomed;
 
4)Exclusive and unique solution can be provided to our customer by our well-trained and professional engineers and staffs;
 
5)Special discount and protection of sales area will be provided to our distributor.

Shipping:
BY DHL, UPS, FedEx, TNT, EMS etc...
For mass order delivery, can be optional with terms of Exwork, FOB, CNF, CIF by air or by sea based on the buyer forwarder.

Payment:
Paypal, Escrow for samples, small qty order or urgent orders at the buyer convenience .TT, L/C, Western Union for mass orders.
30% as Deposit, 70% Balance paid before delivery

Packing:
1) Package:available according to client's request,poly bag, carton box and so on
2) Inner packing: Wooden reel, plastic reel, and paper reel available. 
3) Outer packing: Carton box, pull out box, pallet available. 
4) Other packing available according to client's request.

                                  Lulink Electronics Technology Co. Ltd 
Established in 2005 with headquarter and R&D managing department based in Guangzhou.
Lulink is an export organization specialized in developing,designing,producing network intellgent wire and telecommunication equipments,the products range consists of main categories and metal sheeting,Lulink is supported by a strong R&D team which has more than three years experience in the field of technology and integrating brilliant designers,technicians,support groups,sales and marketing organizations.We offers and accepts OEM/ODM service to customers.We have evperienced employees,respectively specialized in management,all the workers received the professional training with some years experience for their activities.

Our Main products:
Copper System:LAN cables,  Adaptor,  Connector and Spliter,  Cabinet, PATCH CORD, TOOLS, Coaxial cables 
Fiber Optic: Fiber optic patch cord, PLC splitter, adapter, connector, closure, media converter, etc
Cable Assembly: USB cable, HDMI cable, VGA cable, AV cable, DVI cable, etc
 
All has been certified by ISO9001:2008/ROHS/CE/UL/3C and so on.
 
You receive the highest quality products,deliverd on timeand 100% tested and inspected.We guaranty our products with long time end-to-end networks solution by the term.Lulink guarantees to offer safer and more reliable products with reasonable prices.

If you have any interests in our products,please feel free contact me

Debby Cao
Lulink Electronics Technology Co., Ltd.                                  Guangzhou Lulink Hot Sale FO Patch Cord

LK03FCFC101
FC-FC,SM,SIMPLEX,2.0/3.0MM

Fiber optic patch cable brief introduction
Fiber patch cable is the fiber which connects the computer with equipment. , it is very convenient to connect and manage, thicker layer of protection, generally used in the connection between the Optical and the terminal box.

Fiber Jumper structure
1.it's structure is similar with the structure of coaxial cable, both of them do not mesh shield.
2. The center is glass core of light transferring
3. Core diameter of Multimode fiber is 15μm ~ 50μm,
4. Core diameter of Single-mode fiber is 8μm ~ 10μm.
5. The core surrounded by a layer of glass envelope with lower refractive index, so the fiber remained in the core
6. A thin plastic coat outside is used to protect the envelope.

Fiber jumper Category
Transmission medium:
1. Silicon fiber optic jumper
2. Plastic fiber optic jumper

Based on connector:
FC patch cable,SC patch cable,ST patch cable,LC patch cable,MTRJ patch cable,MPO patch cable,MU patch cable,SMA patch cable,FDDI patch cable,E2000patch cable,DIN4patch cable,D4patch cable and so on.
Normal fiber optic patch cable:FC-FC,FC-SC,FC-LC,FC-ST,SC-SC,SC-ST and so on
Based on Cable outer sheath material:
Ordinary type, the common flame retardant type, low smokes zero halogen type, low smoke zero halogen flame retardant type.
 
Based on Patch cable length:0.5m,1m,2m,3m,5m,10m
Based on single mode or multi-mode:
Single mode:color yellow can describe fiber optic patch cable, the color of connector and out jacket is blue, long distance transferring.
Multi-mode:color orange or gray can describe fiber optic patch cable, the color of connector and out jacket is black, short distance transferring.

Based on Fiber patch cable using notes:
1, the fiber optic patch cable can not over-bending and circling, it will increase the attenuation of light in the transmission process.
2, wave length of fiber optic module in two ends must be consistent. It means two ends of fiber optic module must be same.
3. The out jacket of connector must be used to protect against dust and oil damaging the optical fiber coupling.

Characteristics of optical fiber patch cable
1. Low insertion loss
2 good repeatability
3.big Return Loss
4.Mutual insert performance
5 good temperature stability

Fiber optic patch cable Application
1. An optical fiber communication system
2.optical access network
3 fiber-optic data transmission
4. Fiber optic CATV
5.a local area network (LAN)
6. Test equipment
7 fiber optic sensors
 
The most advanced equipments for both producing and testing, which imported from Europe and America. 
The main export markets:
North America, Asia ,Western Europe , Australia , Africa ,South America ,Middle East

Our service:
1)Reply your enquiry within 24 working hours;
 
2)Experienced staffs answer all your questions in fluent English;
 
3)Customized Design is available,OEM&ODM are welcomed;
 
4)Exclusive and unique solution can be provided to our customer by our well-trained and professional engineers and staffs;
 
5)Special discount and protection of sales area will be provided to our distributor.

Shipping:
BY DHL, UPS, FedEx, TNT, EMS etc...
For mass order delivery, can be optional with terms of Exwork, FOB, CNF, CIF by air or by sea based on the buyer forwarder.

Payment:
Paypal, Escrow for samples, small qty order or urgent orders at the buyer convenience .TT, L/C, Western Union for mass orders.
30% as Deposit, 70% Balance paid before delivery

Packing:
1) Package:available according to client's request,poly bag, carton box and so on
2) Inner packing: Wooden reel, plastic reel, and paper reel available. 
3) Outer packing: Carton box, pull out box, pallet available. 
4) Other packing available according to client's request.

                                  Lulink Electronics Technology Co. Ltd 
Established in 2005 with headquarter and R&D managing department based in Guangzhou.
Lulink is an export organization specialized in developing,designing,producing network intellgent wire and telecommunication equipments,the products range consists of main categories and metal sheeting,Lulink is supported by a strong R&D team which has more than three years experience in the field of technology and integrating brilliant designers,technicians,support groups,sales and marketing organizations.We offers and accepts OEM/ODM service to customers.We have evperienced employees,respectively specialized in management,all the workers received the professional training with some years experience for their activities.

Our Main products:
Copper System:LAN cables,  Adaptor,  Connector and Spliter,  Cabinet, PATCH CORD, TOOLS, Coaxial cables 
Fiber Optic: Fiber optic patch cord, PLC splitter, adapter, connector, closure, media converter, etc
Cable Assembly: USB cable, HDMI cable, VGA cable, AV cable, DVI cable, etc
 
All has been certified by ISO9001:2008/ROHS/CE/UL/3C and so on.
 
You receive the highest quality products,deliverd on timeand 100% tested and inspected.We guaranty our products with long time end-to-end networks solution by the term.Lulink guarantees to offer safer and more reliable products with reasonable prices.

If you have any interests in our products,please feel free contact me

Debby Cao
Lulink Electronics Technology Co., Ltd.